MWPR1516CFM datasheet(6/38 Pages) NXP

6 / 38 page

1.4 Voltage and current operating ratings

Absolute maximum ratings are stress ratings only, and functional operation at the

maximum is not guaranteed. Stress beyond the limits specified in the following table

may affect device reliability or cause permanent damage to the device. For functional

operating conditions, refer to the remaining tables in this document.

This device contains circuitry protecting against damage due to high static voltage or

electrical fields; however, it is advised that normal precautions be taken to avoid

application of any voltages higher than maximum-rated voltages to this high-impedance

circuit. Reliability of operation is enhanced if unused inputs are tied to an appropriate

logic voltage level (for instance, either VSS or VDD) or the programmable pullup resistor

associated with the pin is enabled.

Table 1. Voltage and current operating ratings

Symbol

Description

Min.

Max.

Unit

VREC

Supply voltage from wireless receiver rectifier

VAC1/AC2

AC voltage input from wireless receiver coil

-0.3

IVREC

Maximum current into VREC

120

VDIO

Digital input voltage (except RESET_b, EXTAL, and XTAL)

-0.3

VDD+0.3

VAD_IN

Wired power input voltage

VAIO

• Analog1, RESET, VOUT_FB, EXTAL, and XTAL input

voltage

• VOUT and ISENS input voltage

-0.3

VDD+0.3

5.5

Instantaneous maximum current single pin limit

• for GPIO pins

• for other pins except power pins

-25

-10

1. Analog pins are defined as pins that do not have an associated general-purpose I/O port function.

Ratings

MWPR1516 16 KB Flash, Rev2, 1/2015.

Freescale Semiconductor, Inc.

MWPR1516CFM Datasheet(PDF) 6 Page - NXP Semiconductors

MWPR1516CFM Datasheet(HTML) 6 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Datasheet Download

Link URL