DLPA2000 datasheet(13/63 Pages) TI

13 / 63 page

6.5 Power Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETER(1) (2) (3)

TEST CONDITIONS

MIN

TYP(4)

MAX(5)

UNIT

I(VDD) +

I(VDD_PLLM) +

I(VDD_PLLD)

1.1-V rails

Frame rate = 60 Hz

124

184

Frame rate = 120 Hz

161

243

Frame rate = 240 Hz

214

373

I(VDD_PLLM)

MCG PLL 1.1-V current(6)

Frame rate = 60 Hz

Frame rate = 120 Hz

Frame rate = 240 Hz

I(VDD_PLLD)

DCG PLL 1.1-V current(6)

Frame rate = 60 Hz

Frame rate = 120 Hz

Frame rate = 240 Hz

I(VCC18)

All 1.8-V I/O current: (1.8-V power supply

for all I/O other than the host or parallel

interface and the SPI flash interface)

Frame rate = 60 Hz

Frame rate = 120 Hz

Frame rate = 240 Hz

I(VCC_INTF)

Host or parallel interface I/O current: 1.8 to

3.3 V (includes IIC0, PDATA, video syncs,

and HOST_IRQ pins)(6)

Frame rate = 60 Hz

Frame rate = 120 Hz

Frame rate = 240 Hz

I(VCC_FLSH)

Flash interface I/O current: 1.8 to 3.3 V(6)

Frame rate = 60 Hz

Frame rate = 120 Hz

Frame rate = 240 Hz

(1)

Values assume all pins using 1.1 V are tied together (including VDDLP12), and programmable host and flash I/O are at the minimum

nominal voltage (that is 1.8 V).

(2)

Input image is 320 × 180 (QnHD) 24 bits using VESA reduced blanking v2 timings on the parallel interface at the frame rate shown

with the 0.16-in QnHD (DLP160AP) DMD. The controller has the CAIC and LABB algorithms turned off.

(3)

The values do not take into account software updates or customer changes that may affect power performance.

(4)

Assumes nominal process, voltage, and temperature (25°C nominal ambient) with nominal input images.

(5)

Assumes worst case process, maximum voltage, and high nominal ambient temperature of 65°C with worst case input image.

(6)

This rail was not measured due to board limitations. Simulation values are used instead. Simulations assume 12.5% activity factor,

30% clock gating on appropriate domains, and mixed SVT (standard threshold voltage) or HVT (high threshold voltage) cells

www.ti.com

DLPC3420

DLPS232 – OCTOBER 2021

Submit Document Feedback

Product Folder Links: DLPC3420

DLPA2000 Datasheet(PDF) 13 Page - Texas Instruments

DLPA2000 Datasheet(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Datasheet Download

Link URL