LSF0102 datasheet(21/53 Pages) TI

Part #	LSF0102

Description	LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

PDF	53 Pages

Scroll/Zoom	100%

Manufacturer	TI [Texas Instruments]

Direct Link	http://www.ti.com

Logo

21 / 53 page

Vref_A

VCCB

200 kΩ

GND

LSF0108

Vref_B

3.3 V

Device

3.3 V

RB1

0.1 μF

RA1

1.8 V

Device

1.8 V

VCCA

Figure 9-5. Single Supply Translation with 3.3 V Supply

The steps to select the resistor values for R1 and R2 are as follows:

1. Select a value for R1. Typically, 1 MΩ is used to reduce current consumption.

2. Plug in values for your system into the the following equation. Note that Vref_A is the lowest voltage in the

system. VCCB is the primary supply and R1 is the selected value from step 1.

R2 = 200 103 × R1 × VREFA

200 103 + R1 VCCB − VREFA − 0.85 × R1

(4)

The single supply used must be at least 0.8 V larger than the lowest desired translation voltage. The voltage at

Vref_A must be selected as the lowest voltage to be used in the system. The LSF evaluation module (LSF-EVM)

contains unpopulated pads to place R1 and R2 for single supply operation testing. For an example single supply

translation schematic and details, see the Single Supply Translation with the LSF Family video.

www.ti.com

LSF0108

SDLS966L – DECEMBER 2013 – REVISED DECEMBER 2022

Submit Document Feedback

Product Folder Links: LSF0108

LSF0102 Datasheet(PDF) 21 Page - Texas Instruments