FN3332 Rev 0.00

Page 7 of 11

December 1992

CD4098BMS

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 1999. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS

FUNCTION

OPEN

GROUND

VDD

9V

 -0.5V

OSCILLATOR

50kHz

25kHz

Static Burn-In 1

Note 1

6, 7, 9, 10

1-5, 8, 11-15

16

Static Burn-In 2

Note 1

6, 7, 9, 10

1, 8, 15

2-5, 11-14, 16

Dynamic Burn-

In Note 1

-

1, 4, 8, 12, 15

2, 14, 16

6, 7, 9, 10

5, 11

3, 13

Irradiation

Note 2

2, 6, 7, 9, 10, 14

1, 8, 15

3-5, 11-13, 16

NOTE:

1. Each pin except VDD and GND will have a series resistor of 10K

 5%, VDD = 18V  0.5V

2. Each pin except VDD and GND will have a series resistor of 47K

5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures, VDD

= 10V

 0.5V

TABLE 9. FUNCTIONAL TERMINAL CONNECTIONS

FUNCTION

VDD TO

TERM. NO.

VSS TO

TERM. NO.

INPUT PULSE TO

TERM. NO.

OTHER

CONNECTIONS

MONO 1

MONO 2

MONO 1

MONO 2

MONO 1

MONO 2

MONO 1

MONO 2

Leading Edge Trigger/

Retriggerable

3, 5

11, 13

4

12

Leading Edge Trigger/

Non-Retriggerable

3

13

4

12

5-7

11-9

Trailing Edge Trigger/

Retriggerable

313412511

Trailing Edge Trigger/

Non-Retriggerable

3

13

5

11

4-6

12-10

Unused Section

5

11

3, 4

12, 13

NOTES:

1. A retriggerable one-shot multivibrator has an output pulse width which is extended one full time period (TX) after application of the last

trigger pulse. The minimum time between retriggering edges (or trigger and retrigger edges) is 40% of (TX).

2. A non-retriggerable one-shot multivibrator has a time period TX referenced from the application of the first trigger pulse.

TX

TX

INPUT PULSE TRAIN

RETRIGGERABLE MODE

PULSE WIDTH (+TR MODE)

NON-RETRIGGERABLE MODE

PULSE WIDTH (-TR MODE)