3

Integrated

Circuit

Systems, Inc.

ICS951413

0929D—10/30/06

Pin Description (Continued)

PIN #

PIN NAME

PIN

TYPE

Pin Description

29

ATIGCLKC0

OUT Complementary clock of differential ATIGCLK clock pair.

30

ATIGCLKT0

OUT True clock of differential ATIGCLK clock pair.

31

GNDATI

PWR Ground for ATI Gclocks, nominal 3.3V

32

VDDATI

PWR Power supply ATI Gclocks, nominal 3.3V

33

SRCCLKC0

OUT Complement clock of differential SRC clock pair.

34

SRCCLKT0

OUT True clock of differential SRC clock pair.

35

VDDSRC

PWR Supply for SRC clocks, 3.3V nominal

36

GNDSRC

PWR Ground pin for the SRC outputs

37

IREF

OUT

This pin establishes the reference current for the differential current-mode

output pairs. This pin requires a fixed precision resistor tied to ground in order

to establish the appropriate current. 475 ohms is the standard value.

38

GNDA

PWR Ground pin for the PLL core.

39

VDDA

PWR 3.3V power for the PLL core.

40

CPUCLKC2_ITP

OUT

Complementary clock of differential pair CPU outputs. These are current mode

outputs. External resistors are required for voltage bias.

41

CPUCLKT2_ITP

OUT

True clock of differential pair CPU outputs. These are current mode outputs.

External resistors are required for voltage bias.

42

CPUCLKC1

OUT

Complementary clock of differential pair CPU outputs. These are current mode

outputs. External resistors are required for voltage bias.

43

CPUCLKT1

OUT

True clock of differential pair CPU outputs. These are current mode outputs.

External resistors are required for voltage bias.

44

GNDCPU

PWR Ground pin for the CPU outputs

45

VDDCPU

PWR Supply for CPU clocks, 3.3V nominal

46

CPUCLKC0

OUT

Complementary clock of differential pair CPU outputs. These are current mode

outputs. External resistors are required for voltage bias.

47

CPUCLKT0

OUT

True clock of differential pair CPU outputs. These are current mode outputs.

External resistors are required for voltage bias.

48

*CPU_STOP#

IN

Stops all CPUCLK, except those set to be free running clocks

49

GNDPCI

PWR Ground pin for the PCI outputs

50

**CK410#/PCICLK0

I/O

FS Table select latch input pin / 3.3V PCI clock output.

0 = CK410 FS Table, 1 = CK409 FS Table

51

VDDPCI

PWR Power supply for PCI clocks, nominal 3.3V

52

**TEST_SEL/REF2

I/O

TEST_SEL: latched input to select TEST MODE / 14.318 MHz reference clock.

1 = All outputs are CK410 REF/N test mode

0 = All outputs behave normally.

53

**FS_B/REF1

I/O

Frequency select latch input pin / 14.318 MHz reference clock.

54

**FS_A/REF0

I/O

Frequency select latch input pin / 14.318 MHz reference clock.

55

GND

PWR Ground pin.

56

VDDREF

PWR Ref, XTAL power supply, nominal 3.3V