Page 3

Rev: 08/24/22 Part#64-0503 vD

Copyright © 2022 Sensata Technologies, Inc.

www.sensata.com

GENERAL FEATURES AND CAPABILITIES

Transfer relay capability

50 AAC maximum each input (2 inputs)

Five stage charging capability

Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™

Battery temperature compensation

Standard with available temp sensor connected (battery temp 0 – 50 °C)

Internal cooling

0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Internal protection

Over-current protection and multipoint over-temperature protection

RVIA “RV-C” (CAN) compliant

Yes, with electrically isolated CAN port - supports up to 2 inverters per network

Corrosion protection

PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners

Safety listings

ETL listed to UL/cUL 458, CSA C22.2 No. 107.1-01

Warranty

Three years parts and labor

Branch-rated output circuit breakers

No

ENVIRONMENTAL SPECIFICATIONS

Temperature (Operating/Non-operating)

-4° F to 140° F (-20° C to +60° C) / -40° F to 158° F (-40° C to +70° C)

Operating humidity

0 to 95% RH non-condensing

PHYSICAL SPECIFICATIONS

Dimensions (l x w x h)

13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)

Shipping dimensions (l x w x h)

19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm)

Mounting

Shelf or wall (vents not allowed to face downward unless ME-CB or MPX-CB is installed)

Weight

Unit: 55 lb (24.9 kg) / Shipping: 63 lb (28.6 kg)

Max operating altitude

15,000 ft (4570 m)

AGENCY APPROVALS & CERTIFICATIONS

ETL listed to UL/cUL 458, CSA C22.2 No. 107.1-01

Testing for specifications at 25° C.

Specifications subject to change without notice.

GENERAL NOTES

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that

incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for

using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been

created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that

specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements,

improvements, and other changes to its data sheets or components without notice.

Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO

OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO

LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE

PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE

DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY

WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET

ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD

TO SENSATA DATA SHEETS OR USE THEREOF.

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY

FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY

RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS

PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED

INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA

CONTACT US

Regional head offices:

United States of America

Sensata Technologies

Attleboro, MA

Phone: 508-236-3800

E-mail: support@sensata.com

Netherlands

Sensata Technologies Holland B.V.

Hengelo

Phone: +31 74 357 8000

E-mail: support@sensata.com

China

Sensata Technologies China Co., Ltd.

Shanghai

Phone: +8621 2306 1500

E-mail:support@sensata.com