Type 8036

4 | 12

Visit product website 

Output

• Transistor (digital output):

– 1 transistor output (transmitter 2-wire):

– NPN, open collector

– max. 700 mA

– 1…36 V DC

– 2 transistor outputs (transmitter 2 or 3-wire):

– adjustable as sourcing or sinking (respectively both as PNP or NPN ), open collector

– max. 700 mA

– 0.5 A max. per transistor if the 2 transistor outputs are wired

– NPN-output: 1…36 V DC

– PNP-output: Power supply

• Current (analogue output):

– 4…20 mA

– adjustable as sourcing or sinking (in the same mode as transistor)

– max. loop impedance:

– 1 current output (transmitter 2-wire): 1100 Ω at 36 V DC, 610 Ω at 24 V DC, 180 Ω at 14 V DC

– 2 current outputs (transmitter 3-wire): 1100 Ω at 36 V DC, 610 Ω at 24 V DC, 100 Ω at

12 V DC

Voltage supply cable

The female M12 connector and/or the male M12 connector are not included in the delivery and must

be ordered separately, see chapter “10.5. Ordering chart accessories” on page 12.

For these connectors, use a shielded cable with:

• diameter: 3…6.5 mm

• cross section of wires: max. 0.75 mm²

Medium data

Fluid temperature

With Inline sensor-fitting Type S030 in:

• PVC: 0…+ 50 °C (+ 32…+ 122 °F)

• PP: 0…+ 80 °C (+ 32…+ 176 °F)

• PVDF, stainless steel or brass: - 15…+ 100 °C (+ 5…+ 212 °F)

See data sheet Type S030  for more information.

Fluid pressure (max.)

With Inline sensor-fitting Type S030 in:

• plastic: max. PN 10

• metal: max. PN 16 (PN 40 on request)

See data sheet Type S030  for more information.

Viscosity

Max. 300 cSt

Rate of solid particles

Max. 1 %

Maximum particle size

0.5 mm

Process/Pipe connection & communication

Pipe connection

With Inline sensor-fitting Type S030 in:

• Plastic: true union with nut and solvent/fusion socket, spigot or external thread

• Metal: internal or external thread, weld ends, clamp or flange

See data sheet Type S030  for more information.

Electrical connection

• 2 or 3 outputs transmitter (2-wire) variant: 1 x 5-pin M12 male connector

• 4 outputs transmitter (3-wire) variant: 1 x 5-pin M12 male and 1 x 5-pin M12 female connectors

Approvals and conformities

Directives

CE directive

Further information on the CE Directive can be found in chapter “2.3. Standards” on page 5

Pressure equipment directive

Complying with article 4, paragraph 1 of 2014/68/EU directive

Further information on the pressure equipment directive can be found in chapter “2.4. Pressure

Equipment Directive (PED)” on page 5.

North America (USA/Canada)

UL Recognized for the USA and Canada