Dimensions: [mm]

1,0 ±0,05

0,25 ±0,1

0,2 ±0,1

Scale - 35:1

Recommended Land Pattern: [mm]

0,5

0,5

1,5

Scale - 35:1

Schematic:

Electrical Properties:

Properties

Test conditions

Value

Unit

Tol.

Resistance

R

1

kΩ

±1%

Rated Power

PRated @ 70 °C

0.1

W

max.

Limiting Element Voltage

VE

50

V

max.

Temperature Coefficient of

Resistance (min.)

TCR

-100

ppm/ °C

Temperature Coefficient of

Resistance (max.)

TCR

100

ppm/ °C

Rated Voltage (V) = √(Rated Power (W) x Nominal Resistance Value (Ω))

Rated voltage shall be the calculated value or limiting element voltage, whichever is lower. The limiting

element voltage is the rated voltage at the critical resistance value.

General Information:

Resistance Element Type

RuO2

Resistor Technology

Thick Film Resistors

Operating Temperature

-55 up to +155 °C

Storage Conditions

(in original packaging)

5 °C up to + 35 °C; 25 % up to 75 % RH

Test conditions of electrical properties: +20 °C, 35 % RH if not specified differently

Sulfur resistant: Tested according to ASTM-B-809

FIT according to separate documentation

Component conform to REACh and RoHS requirements and standards

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

CHECKED

REVISION

DATE (YYYY-MM-DD)

GENERAL TOLERANCE

PROJECTION

METHOD

FPu

001.000

2023-09-14

DIN ISO 2768-1m

DESCRIPTION

TECHNICAL REFERENCE

WRIS-RSKS Thick Film - Anti-

Sulfur General Purpose

KS04021001F110KAATH0000

ORDER CODE

560112110012

SIZE/TYPE

BUSINESS UNIT

STATUS

PAGE

0402

eiSos

Valid

1/9

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH

& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic

component which is used in electrical circuits that require high safety and reliability functions or performance.