VTI Technologies Oy

Myllynkivenkuja 6

P.O. Box 27

FI-01621 Vantaa

Finland

Tel. +358 9 879 181

Fax +358 9 879 18791

sales@vti.fi

VTI Technologies Oy

Frankfurt Branch

Rennbahnstr. 72-74

D-60528 Frankfurt am Main

Germany

Tel. +49 69 6786 880

Fax +49 69 6786 8829

sales.de@vti.fi

VTI Technologies, Inc.

One Park Lane Blvd.

Suite 804 - East Tower

Dearborn, MI 48126

USA

Tel. +1 313 425 0850

Fax +1 313 425 0860

sales@vtitechnologies.com

ELECTRICAL CONNECTION

DIMENSIONS

RECOMMENDED CIRCUIT

PCB PAD LAYOUTS

ABSOLUTE MAXIMUM RATINGS

Parameter

Value

Units

Acceleration (powered or non-powered)

20000

g

Supply voltage

-0.3 to +7.0

V

Voltage at input / output pins

-0.3 to Vdd + 0.3

V

Temperature range

-55 to +125

ºC

Pin#

Pin Name Connection

1

Open or capacitively connected to GND for EMC*)

2

Open or capacitively connected to GND for EMC*)

3

Open or capacitively connected to GND for EMC*)

4

GND

Negative supply voltage (VSS)

5

Open or capacitively connected to GND for EMC*)

6

ST

Self-test control

7

VOUT

Sensor analog output

8

VDD

Positive supply voltage (VDD)

*) recommended capacity min. 20 pF – Effectiveness should be tested and if necessary adapted in

the respective connection.

The accelerometer weighs under 1 g.

The size of the part is approximately (w x h x l) 9 x 5 x 11 mm. Pin pitch is standard 100 mils.

Acceleration in the direction of the arrow

will increase the output voltage.

SCA610 Series