UMBRA PROFESSIONAL IP65

Professional IP65 Weatherproof Batten, DALI

Smartest and most feature inclusive batten on the market.

Provides long life and unrivaled control.

Flicker-free dimming throughout the dimming range which

allows light level adjustment to gain maximum power

savings.

IP65 weatherproof rating and IK08 impact rating.

LED lifetime >102,000 hours (L70), >102,000 hours (L80)

and 55,000 hours (L90).

12 years design life at max. ambient

Microwave sensor suitable for DALI-2 (IEC 62386-303)

allows unlimited control on DALI-2 compliant control

systems.

Full support for DALI and DALI-2 (IEC 62386) DT6 (LED).

Corridor mode support in standalone mode to intelligently

save power by turning off when there is no occupancy.

Power monitoring (DT51) allows control systems to

montior and report active power and total power

consumption.

Built-in DALI-2 switch can be used for standalone control

or unlimited control with DALI-2 compliants control

systems.

ORDERING INFORMATION

Order code

12094

Description

UMBRA PRO 1200mm

Weatherproof LED batten with

sensor

Driver Type

DALI DT6 LED Driver

DALI DT6 ~ Includes DALI-2 Driver with full support for DT6 allowing flicker free

dimming with compliant DALI-2 Application controllers.

Item Code

EV-UMBRA-PRO-IP65-1200-S

EFFICIENCIES

Total System Efficiency

137 lm/W

The performance of each component of a luminaire is demonstrated through its

efficiencies, which together determine the total system efficiency of the

product. The output of the LED chip is first multiplied by the optical and thermal

efficiencies to calculate the Luminaire efficiency. However, this calculation does

not consider the driver efficiency. To determine the overall efficiency of the

system, the Luminaire efficiency must be multiplied by the driver efficiency,

which accounts for all losses in the system.

MECHANICAL

Body Material

Polycarbonate

Diffuser Material

Polycarbonate

Fitting Colour

Grey

IK Rating

IK08

Installation Type

Surface mount

IP Rating

IP65

ELECTRICAL

Electrical Rating

Class I

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively

means that the voltage range of these products are 216Vac - 253Vac or 240V

+6%

Maximum Wattage

33 W

Power Factor

0.95

Standby Power

0.3 W

Standby power for non-maintained/switched maintained emergency devices is

measured when the light is off and the charger is in standby mode. For

maintained emergency devices, standby power is measured when the light is on

and the charger is in standby mode. Typically, charging occurs for the first 16

hours after the device is powered or after a battery discharge.

1300 438 658

sales@evolt.com.au

ektor.com.au

© 2025 Evolt