Electronic Components Datasheet Search
  English  ▼

X  

ACT88420 Datasheet(PDF) 2 Page - Qorvo, Inc

Part # ACT88420
Description  Advanced PMIC with 4 Bucks, 2 LDO, and Load Bypass Switches
PDF  10 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  QORVO [Qorvo, Inc]
Direct Link  https://www.qorvo.com/
Logo QORVO - Qorvo, Inc

ACT88420 Datasheet(HTML) 2 Page - Qorvo, Inc

  ACT88420 Datasheet HTML 1Page - Qorvo, Inc ACT88420 Datasheet HTML 2Page - Qorvo, Inc ACT88420 Datasheet HTML 3Page - Qorvo, Inc ACT88420 Datasheet HTML 4Page - Qorvo, Inc ACT88420 Datasheet HTML 5Page - Qorvo, Inc ACT88420 Datasheet HTML 6Page - Qorvo, Inc ACT88420 Datasheet HTML 7Page - Qorvo, Inc ACT88420 Datasheet HTML 8Page - Qorvo, Inc ACT88420 Datasheet HTML 9Page - Qorvo, Inc Next Button
Zoom Inzoom in Zoom Outzoom out
 2 / 10 page
background image
ACT88420
Advanced PMIC with 4 Bucks, 2 LDO,
and Load Bypass Switches
ACT88420 Datasheet Brief, Rev. B, December 2023
2 of 10
www.qorvo.com
®
BENEFITS and FEATURES
• Wide Input Voltage Range
• Vin = 2.7V to 5.5V
• Complete Integrated Power Solution
• Buck 1: 4A DC/DC Step-Down Regulator with By-
pass Function
• Buck 2: 2A DC/DC Step-Down Regulator
• Buck 3: 4A DC/DC Step-Down Regulator Opti-
mized for Low Voltage Output
• Buck 4: 2A DC/DC Step-Down Regulator, can be
Configured as 400mA LDO
• LDO1: 400mA LDO or 1A Load Switch
• LDO2: 400mA LDO or Load Switch
• Current Mode Control for Buck1, COT Control for
Buck 2, 3, and 4
• Space Savings
• Fully Integrated
• Works with 0.47µH Inductor
• Integrated sequencing
• Ultra-low Quiescent Current
• Excellent Efficiency at Very Light Load
• Easy System Level Design
• Configurable Sequencing
• Multiple Wake up Triggers with GPIOs
• Seamless Sequencing of External Supplies
• 8 Programmable GPIOs
• Buck 1 and LDO2 Bypass Mode for 3.3V system
level compliance
• LDO1 Bypass Mode with Dedicated Input Pin,
Support up to 1A Current
• Highly Configurable
• Regulator Operation Mode can be Configured by
3-Level GPIOs status
• Configurable Platform ID with Different Power Up
Delay Times
• I2C Interface for Status Reporting and Controlla-
bility
• Programmable Reset and Power Good GPIO’s
• Flexible Sequencing Options
• Multiple Sleep Modes
• Configurable Power Cycle and ActiveSafeTM ROM
Mode through GPIO
• I2C Interface – up to 3.4MHz
APPLICATIONS
• Solid-State Drives (SSD)
• FPGA
• Computer Vision
• Portable Audio / Video
GENERAL DESCRIPTION
The ACT88420 PMIC is an integrated ActiveCiPSTM
power management integrated circuit. It powers a wide
range of processors, including solid-state drive applica-
tions, video processors, FPGA’s, peripherals, and mi-
crocontrollers. The ACT88420 is highly flexible and can
be reconfigured via I2C for multiple applications without
the need for PCB changes. The low external component
count and high configurability significantly speeds time
to market. Examples of configurable options include
output voltage, startup time, slew rate, system level se-
quencing, switching frequency, sleep modes, operating
modes etc. ACT88420 is programmed at the factory
with a default configuration. These settings can be opti-
mized for a specific design through the I2C interface.
The ACT88420 is available in several default configura-
tion. Contact the factory for specific default configura-
tions.
The core of the device includes four DC/DC step down
converters using integrated power FETs, two low-drop-
out regulators (LDO). Buck1 and two LDOs can be con-
figured as a load switch, Buck 4 can be configured as
LDO. Buck1 is a peak current mode, fixed frequency
DC-DC step down converter that is optimized for output
voltage close to the input voltage. Buck1 switches at ei-
ther 1.125MHz or 2.25MHz. Buck 2, 3, and 4 use an
asynchronous constant on-time, ACOT, control archi-
tecture to optimize the load transient response with
0.47uH inductor and smaller output capacitors. The
LDOs only require small ceramic capacitors. All outputs
are highly configurable via the I2C interface.
ACT88420 has 8 configurable GPIOs. These GPIOs
can be configured for multiple purposes like enable sig-
nal for external regulator, interrupt, PWREN, DVS con-
trol, ROM control, etc. In addition, some GPIOs support
3 states status that can be used to configure the regu-
lators operation mode, default output voltage, and extra
turn on delay times without the need for CMI changes.
The ACT88420 PMIC is available in a 2.693 x 2.693 mm
36 ball WLCSP package.



Html Pages

1 2 3 4 5 6 7 8 9 10


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com