User Guide

EVAL-ADF41510

GETTING STARTED

analog.com

Rev. 0 | 3 of 19

SOFTWARE INSTALLATION PROCEDURES

Download the EV-ADF41510SD1Z and EV-ADF41510SD2Z control

software from the product page ADF41510. The FTP user name

and password are printed on a label inside the evaluation kit box.

For the software installation procedure, refer to the PLL Software

Installation Guide.

EVALUATION BOARD SETUP PROCEDURES

To run the software, perform the following steps:

1. After installation, click the ADF41510 icon on the desktop or

select Analog Devices > ADF41510 from the Start menu.

2. In the Select Device and Connection tab, click Connect (see

Figure 2).

3. Approximately 5 sec to 10 sec after connecting the board, the

connection status in the bottom left corner changes from No

device connected to Connected.

Under File, the current settings can be saved to or loaded from a

text file.

Figure 2. Software Front Panel Display, Select Device and Connection Tab