www.ti.com

ABSOLUTE MAXIMUM RATINGS

(1)

TL082-Q1

JFET-INPUT OPERATIONAL AMPLIFIER

SLOS548 – SEPTEMBER 2007

over operating free-air temperature range (unless otherwise noted)

VALUE

VCC+

Supply voltage, positive(2)

18 V

VCC–

Supply voltage, negative(2)

–18 V

VID

Differential input voltage(3)

±30 V

VI

Input voltage(2)(4)

±15 V

Duration of output short circuit(5)

Unlimited

Continuous total power dissipation

(6)

TL082I

–40

°C to 85°C

TA

Operating free-air temperature range

TL082Q

–40

°C to 125°C

θJA

Package thermal impedance, junction to free air(7)

97

°C/W

Human-Body Model

1.5 kV (H1C)

ESD rating(8)

Charged-Device Model

1.5 kV (C5)

Machine Model

200 V (M3)

Operating virtual junction temperature

150

°C

Tstg

Storage temperature range

–65

°C to 150°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–.

(3)

Differential voltages are at IN+ with respect to IN–.

(4)

The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.

(5)

The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

(6)

Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

(7)

The package thermal impedance is calculated in accordance with JESD 51-7.

(8)

ESD protection level per JEDEC classifications JESD22-A114 (HBM), JESD22-A115 (MM), and JESD22-C101 (CDM).

Copyright © 2007, Texas Instruments Incorporated

Submit Documentation Feedback

3