Teensy 3.5 without headers

RODUCT ID: 3267



Description

The awesome new Teensy 3.5 is a small, breadboard-friendly development board designed by Paul

Stoffregen and PJRC. Teensy 3.5 brings a low-cost 32-bit ARM Cortex-M4 platform to hobbyists,

students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming

directly in C language. Teensy 3.5 is an upgrade over 3.2, for when you need even more power!

Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins

are 5 volt tolerant. The unique specs for the 3.5 are:

o

120 MHz ARM Cortex-M4 with Floating Point Unit

o

512K Flash, 192K RAM, 4K EEPROM

o

Microcontroller Chip MK64FX512VMD12

o

1 CAN Bus Port

o

16 General Purpose DMA Channels

o

5 Volt Tolerance On All Digital I/O Pins

The latest in the line of very powerful, USB-capable microcontrollers, the Teensy 3.5 and 3.6 development

boards are faster, more capable, and bigger, putting even more pins on a solderless breadboard. Teensy 3.5

offers a little bit less in its features (MCU, RAM, Flash, clock and some peripherals) which makes it

slightly cheaper than Teensy 3.6. Teensy 3.5 has 5V tolerance on all digital I/O pins. Only Teensy 3.6 has a

USB High Speed (480 Mbit/sec) port accessed using 5 pins on the board.