ABSOLUTE MAXIMUM RATINGS

(1)

RECOMMENDED OPERATING CONDITIONS

TLE2142-Q1

SLOS628 – JULY 2009....................................................................................................................................................................................................... www.ti.com

over operating free-air temperature range (unless otherwise noted)

VCC+

Supply voltage(2)

22 V

VCC–

Supply voltage

–22 V

VID

Differential input voltage(3)

±44 V

VI

Input voltage range (any input)

VCC+ to (VCC– – 0.3) V

II

Input current (each input)

±1 mA

IO

Output current

±80 mA

Total current into VCC+

80 mA

Total current out of VCC–

80 mA

Duration of short-circuit current at (or below) 25°C(4)

Unlimited

θ

JA

Package thermal impedance(5)(6)

97.1°C/W

TA

Operating free-air temperature range

–40°C to 125°C

Tstg

Storage temperature range

–65°C to 150°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260°C

ESD

Electrostatic discharge rating, Human-body model

500 V

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–.

(3)

Differential voltages are at IN+ with respect to IN–. Excessive current flows, if input, are brought below VCC– – 0.3 V.

(4)

The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation

rating is not exceeded.

(5)

Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

(6)

The package thermal impedance is calculated in accordance with JESD 51-7.

MIN

MAX

UNIT

VCC±

Supply voltage

±2

±22

V

VCC = 5 V

0

2.7

VIC

Common-mode input voltage

V

VCC± = ±15 V

–15

12.7

TA

Operating free-air temperature

–40

125

°C

4

Submit Documentation Feedback

Copyright © 2009, Texas Instruments Incorporated

Product Folder Link(s): TLE2142-Q1