Warning

These products are intended for use in industrial compressed air systems only. Do not use these products where

pressures and temperatures can

exceed those listed under ‘Technical Data’.

Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not

within published specifications, consult Norgren.

Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to

consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or

damage to equipment in the event of such failure.

System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot

be adequately provided.

System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products

where applicable.