MPQ2967

Dual-Rail, Digital, 4-Phase Controller

with PMBus Interface, AEC-Q100 Qualified

MPQ2967 Rev. 1.11

MonolithicPower.com

1

2/19/2025

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2025 MPS. All Rights Reserved.

DESCRIPTION

The MPQ2967 is a digital, dual-rail, multi-phase

controller for autonomous driving applications. It

can work with MPS

’s Intelli-PhaseTM products to

complete the multi-phase voltage regulator (VR)

solution with minimal external components. The

device can be configured for up to 4 phases

between two rails.

The on-chip, multiple-time programmable (MTP)

memory

stores

and

restores

device

configurations. Device configurations and fault

parameters can be configured or monitored via

the PMBus interface. The MPQ2967 can monitor

and report the output current (IOUT) through the

Intelli-PhaseTM current-sense (CS) output.

The MPQ2967 is based on unique, digital, multi-

phase nonlinear control to provide fast transient

response to a load step with minimal output

capacitors. With only one power loop control

method for both the steady state and load

transient response, power loop compensation is

simple to configure.

The MPQ2967 is available in a TQFN-40

(6mmx6mm) package.

FEATURES

• Dual-Rail, Up to 4-Phase Digital PWM

Controller

• PMBus Compliant for Configuring and

Monitoring

• PWMVID Interface Compliant

• Built-In Multiple-Time Programmable (MTP)

Memory to Store Custom Configurations

• Automatic Loop Compensation

• Automatic Phase-Shedding (APS) with and

without Discontinuous Conduction Mode

(DCM) to Improve Overall Efficiency

• Phase-to-Phase Active Current Balancing

• Input Voltage (V

IN) and Output Voltage

(VOUT) Monitoring

• Output Current (I

OUT) Monitoring

• Regulator Temperature Monitoring

• Under-Voltage Lockout (UVLO), Over-

Voltage Protection (OVP), Under-Voltage

Protection (UVP), Over-Current Protection

(OCP), Over-Temperature Protection

(OTP), and Reverse-Voltage Protection

(RVP)

• Cyclic Redundancy Check (CRC) and Error

Correction Code (ECC) for MTP

Transformation

• Packet Error Checking (PEC) for PMBus

Communication

• Separate EN for Each Rail

• Digital, Configurable Load Line

• Available in a TQFN-40 (6mmx6mm)

Package

• Available in AEC-Q100 Grade 1

MPSafe

T M

Developed for Functional

Safety Applications: ISO 26262

Compliant

APPLICATIONS

• Autonomous Driving System-On-Chips

(SoCs)

• Infotainment Systems

All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.

For MPS green status, please visit the MPS website under Quality

Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are

trademarks of Monolithic Power Systems, Inc. or its subsidiaries.