8

ISO7830, ISO7830F

SLLSEO2B – JULY 2015 – REVISED JUNE 2016

www.ti.com

Product Folder Links: ISO7830 ISO7830F

Submit Documentation Feedback

Copyright © 2015–2016, Texas Instruments Incorporated

6.7 Regulatory Information

All DW package certifications are complete. DWW package certifications are complete for UL, VDE and TUV and planned for

CSA and CQC.

VDE

CSA

UL

CQC

TUV

Certified according to DIN V

VDE V 0884–10 (VDE V

0884–10):2006-12 and DIN EN

60950-1 (VDE 0805 Teil

1):2011-01

Approved under CSA

Component Acceptance Notice

5A, IEC 60950-1 and IEC

60601-1

Certified according to UL

1577 Component

Recognition Program

Certified according to GB

4943.1-2011

Certified according to

EN 61010-1:2010 (3rd Ed) and

EN 60950-

1:2006/A11:2009/A1:2010/

A12:2011/A2:2013

Reinforced insulation

Maximum transient isolation

voltage, 8000 VPK;

Maximum repetitive peak

isolation voltage, 2121 VPK

(DW), 2828 VPK (DWW);

Maximum surge isolation

voltage, 8000 VPK

Reinforced insulation per CSA

60950-1-07+A1+A2 and IEC

60950-1 2nd Ed., 800 VRMS

(DW) and 1450 VRMS (DWW)

maximum working voltage

(pollution degree 2, material

group I);

Single protection, 5700

VRMS

Reinforced Insulation,

Altitude

≤ 5000 m, Tropical

Climate, 250 VRMS

maximum working voltage

5700 VRMS Reinforced insulation

per

EN 61010-1:2010 (3rd Ed) up to

working voltage of 600 VRMS

(DW package) and 1000 VRMS

(DWW package)

2 MOPP (Means of Patient

Protection) per CSA 60601-

1:14 and IEC 60601-1 Ed. 3.1,

250 VRMS (354 VPK) maximum

working voltage

5700 VRMS Reinforced insulation

per

EN 60950-

1:2006/A11:2009/A1:2010/

A12:2011/A2:2013 up to working

voltage of 800 VRMS (DW

package) and 1450 VRMS (DWW

package)

Certificate number: 40040142

Master contract number:

220991

File number: E181974

Certificate number:

CQC15001121716

Client ID number: 77311

6.8 Safety Limiting Values

Safety limiting intends to minimize potential damage to the isolation barrier upon failure of input or output circuitry. A failure of

the I/O can allow low resistance to ground or the supply and, without current limiting, dissipate sufficient power to overheat

the die and damage the isolation barrier potentially leading to secondary system failures.

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

DW PACKAGE

IS

Safety input, output, or

supply current

RθJA = 81.1°C/W, VI = 5.5 V, TJ = 150°C, TA = 25°C, see Figure 3

280

mA

RθJA = 81.1°C/W, VI = 3.6 V, TJ = 150°C, TA = 25°C, see Figure 3

428

RθJA = 81.1°C/W, VI = 2.75 V, TJ = 150°C, TA = 25°C, see Figure 3

560

PS

Safety input, output, or total

power

RθJA = 81.1°C/W, TJ = 150°C, TA = 25°C, see Figure 5

1541

mW

TS

Maximum safety

temperature

150

°C

DWW PACKAGE

IS

Safety input, output, or

supply current

RθJA = 83.4°C/W, VI = 5.5 V, TJ = 150°C, TA = 25°C, see Figure 4

273

mA

RθJA = 83.4°C/W, VI = 3.6 V, TJ = 150°C, TA = 25°C, see Figure 4

416

RθJA = 83.4°C/W, VI = 2.75 V, TJ = 150°C, TA = 25°C, see Figure 4

545

PS

Safety input, output, or total

power

RθJA = 83.4°C/W, TJ = 150°C, TA = 25°C, see Figure 6

1499

mW

TS

Maximum safety

temperature

150

°C

The maximum safety temperature is the maximum junction temperature specified for the device. The power

dissipation and junction-to-air thermal impedance of the device installed in the application hardware determines

the junction temperature. The assumed junction-to-air thermal resistance in the Thermal Information is that of a

device installed on a high-K test board for leaded surface mount packages. The power is the recommended

maximum input voltage times the current. The junction temperature is then the ambient temperature plus the

power times the junction-to-air thermal resistance.