te.com

/products/plasti-grip

Pre-insulated PLASTI-GRIP solderless terminals and splices are designed specifically to answer

the need for inexpensive, insulated electrical terminations. They can be used in almost every

type of commercial application and accommodate wire sizes from 22 AWG through 2/0 AWG.

Carefully engineered application tooling has been developed to ensure uniformly high quality

terminations. Tool and terminal have been designed as a team to promote ease and speed of

application and at the same time to provide precise crimping pressure for every wire size.

The wire and the terminal barrel form a homogeneous mass of metal, providing a connection

of maximum conductivity, tensile strength, and high resistance to corrosion.

The quality performance, the facility of installation and the inherent simplicity make them ideal

for many industrial applications. PLASTI-GRIP products are available as rings, spades, flanged

spaded, slotted rings, splices and several other varieties. Wire ranges for the terminals and

splices are 22 AWG through 2/0 and stud sizes from #2 through 1/2”.

Key Features and BeneFits

•

Vinyl insulation sleeve provides good dielectric

strength and supports the wire insulation so that no

bare wire is exposed

•

Most product is UL and CSA approved

•

Most product rated to 105 degrees C, with an operating

voltage of 600 V

•

Insulation is 94V-0 rated

•

Funneled wire entry on terminal prevents turned back

wire strands and permits rapid wire insertion during

high speed production

•

Serrations in the crimp barrel provide maximum

contact and tensile strength after crimping

Product aPPlications

•

HVAC

•

Instruments/Controls

•

Lighting

•

Switchgear

•

Power Supplies

•

Panel Boxes

•

Transportation

•

Motors

Quick reference Guide

PLASTI-GRIP Terminals & Splices