S24CS0 datasheet(17/47 Pages) SII

17 / 47 page

2-WIRE CMOS SERIAL E2PROM

Rev.4.4_00

S-24CS01A/02A/04A/08A

Seiko Instruments Inc.

7. 2 Random Read

Random read is used to read the data at an arbitrary memory address.

A dummy write is performed to load the memory address into the address counter.

When the E

2PROM receives a 7-bit device address and a 1-bit read / write instruction code set to "0"

following a start condition, it responds with an acknowledge. The E

2PROM then receives an 8-bit word

address and responds with an acknowledge. The memory address is loaded to the address counter in the

2PROM by these operations. Reception of write data does not follow in a dummy write whereas reception

of write data follows in a byte write and in a page write.

Since the memory address is loaded into the memory address counter by dummy write, the master device

can read the data starting from the arbitrary memory address by transmitting a new start condition and

performing the same operation in the current address read.

That is, when the E

2PROM receives a 7-bit device address and a 1-bit read / write instruction code set to

"1", following a start condition signal, it responds with an acknowledge. Next, 8-bit data is transmitted from

the E

2PROM in synchronous to the SCL clock. The master device outputs stop condition not an

acknowledge , the reading of E

2PROM is ended.

SDA

LINE

DEVICE

ADDRESS

WORD

ADDRESS (n)

DUMMY WRITE

DEVICE

ADDRESS

NO ACK from

Master Device

ADR INC

DATA

Remark1. A1 is P1 in the S-24CS08A.

2. A0 is P0 in the S-24CS04A/08A.

3. W7 is optional in the S-24CS01A.

1 0 1 0 A2 A1 A0 0

W7W6W5W4W3W2W1W0

1 0 1 0 A2 A1 A0 1

D7 D6 D5 D4 D3 D2 D1 D0

Figure 17 Random Read

S24CS0 Datasheet(PDF) 17 Page - Seiko Instruments Inc

S24CS0 Datasheet(HTML) 17 Page - Seiko Instruments Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Datasheet Download

Link URL