ICS570-01

MULTIPLIER AND ZERO DELAY BUFFER

ZDB AND MULTIPLIER

IDT™ / ICS™ MULTIPLIER AND ZERO DELAY BUFFER

3

ICS570-01

REV B 072706

External Components

The ICS570-01 requires a minimum number of external components for proper operation. Decoupling capacitors of

0.01 µF should be connected between VDD and GND (pins 3, 6, and 7), as close to the device as possible. A series

termination resistor of 33

Ω may be used on each clock output pin to reduce reflections.

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the ICS570-01. These ratings, which are

standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these

or any other conditions above those indicated in the operational sections of the specifications is not implied.

Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical

parameters are guaranteed only over the recommended operating temperature range.

Recommended Operation Conditions

Item

Rating

Supply Voltage, VDD

7 V

All Inputs and Outputs

-0.5 V to VDD+0.5 V

Ambient Operating Temperature, Commercial version

0 to +70

° C

Ambient Operating Temperature, Industrial version

-40 to +85

° C

Storage Temperature

-65 to +150

° C

Junction Temperature

125

° C

Soldering Temperature

260

° C

Parameter

Min.

Typ.

Max.

Units

Ambient Operating Temperature

-40

+85

° C

Power Supply Voltage (measured in respect to GND)

+3.15

+3.3

+3.45

V