TMS320DM641 datasheet(3/179 Pages) TI

3 / 179 page

Revision History

June 2003 − Revised October 2005

SPRS222E

Revision History

This data sheet revision history highlights the technical changes made to the SPRS222D device-specific data

sheet to make it an SPRS222E revision.

Scope: Applicable updates to the C64x device family, specifically relating to the TMS320DM641/TMS320DM640

devices, have been incorporated.

8−bit TSI Video Port mode now supported.

Added the device-specific information supporting the TMS320DM641/TMS320DM640 silicon revision 2.0, 1.2 and

1.1 devices, which are now in the production data (PD) stage of development.

PAGE(s)

NO.

ADDS/CHANGES/DELETES

Terminal Functions table:

Reset, Interrupts, and General−Purpose Input/Output section:

CLKOUT6/GPO[2]: changed “IPD” to “IPU”

CLKOUT4/GPO[1]: changed “IPD” to “IPU”

Terminal Functions table:

EMIFA (32−BIT) − ADDRESS section:

Updated the Description for Boot Configuration for AEA22:3 Signal Name from “11 − EMIFA boot” to “11 − EMIFA 8−bit ROM

boot”

Device Support, Device and Development-Support Tool Nomenclature:

Updated the TMS320DM64x DSP Device Nomenclature (Including the DM641 and DM640 Devices) figure

Device Configurations, Configurations at Reset, Device Configuration at Device Reset section:

Updated the Functional Description for Bootmode [1:0] for AEA22:21 Configuration Pin from “11 − EMIFA boot” to

“11 − EMIFA 8−bit ROM boot”

Device Configurations, Device Status Register Description section:

Device Status (DEVSTAT) Register Selection Bit Descriptions table:

Updated Bits 3 and 2 Bootmode1 and Bootmode0 Name Description from “11 − EMIFA boot” to “11 − EMIFA 8−bit ROM

boot”

Recommended Operating Conditions:

VOS, Maximum voltage during overshoot row

Deleted −1.0 from MIN

Added VUS, Maximum voltage during undershoot row

Parameter Measurement Information section:

Added AC transient rise/fall time specifications and the following figures:

AC Transient Specification Rise Time figure

AC Transient Specification Fall Time figure

104

Clock PLL, Clock PLL Electrical Data/Timing (Input and Output Clocks):

Switching Characteristics Over Recommended Operating Conditions for AECLKOUT2 for the EMIFA Module table:

Updated Parameter No. 5 from “td(EKIH-EKO2L)” to “td(EKIL-EKO2L)”

Updated Parameter No. 5 from “Delay time, AECLKIN high to AECLKOUT2 low” to “Delay time, AECLKIN low to AECLK-

OUT2 low”

TMS320DM641 Datasheet(PDF) 3 Page - Texas Instruments

TMS320DM641 Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL