M50FW016 datasheet(27/45 Pages) STMICROELECTRONICS

27 / 45 page

27/45

M50FW016

DC AND AC PARAMETERS

This section summarizes the operating measure-

ment conditions, and the DC and AC characteris-

tics of the device. The parameters in the DC and

AC characteristics Tables that follow, are derived

from tests performed under the Measurement

Conditions summarized in Table 17., Table 18.

and Table 19. Designers should check that the op-

erating conditions in their circuit match the operat-

ing conditions when relying on the quoted

parameters.

Table 17. Operating Conditions

Table 18. FWH Interface AC Measurement Conditions

Table 19. A/A Mux Interface AC Measurement Conditions

Figure 8. FWH Interface AC Testing Input Output Waveforms

Symbol

Parameter

Min

Max

Unit

Ambient Operating Temperature (Device Grade 1)

°C

Ambient Operating Temperature (Device Grade 5)

–20

°C

VCC

Supply Voltage

3.6

Parameter

Value

Unit

Load Capacitance (CL)

Input Rise and Fall Times

≤ 1.4

Input Pulse Voltages

0.2 VCC and 0.6 VCC

Input and Output Timing Ref. Voltages

0.4 VCC

Parameter

Value

Unit

Load Capacitance (CL)

Input Rise and Fall Times

≤ 10

Input Pulse Voltages

0 to 3

Input and Output Timing Ref. Voltages

1.5

AI03404

0.6 VCC

0.2 VCC

0.4 VCC

IO > ILO

IO < ILO

Input and Output AC Testing Waveform

Output AC Tri-state Testing Waveform

M50FW016 Datasheet(PDF) 27 Page - STMicroelectronics

M50FW016 Datasheet(HTML) 27 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Datasheet Download

Link URL