3651 Walnut Avenue, Chino, CA 91710

Phone: (909) 627-2453 • Web Site: MendaPump.com

© 2016 DESCO INDUSTRIES INC.

Employee Owned

TB-4015 Page 3 of 5

Maintenance

General

User maintenance is limited to cleaning the unit and replacing the filters with new. Only

MENDA is authorized to carry out component testing and replacement. Unauthorized work or

the use of unauthorized replacement filters may result in a potentially dangerous situation and/

or damage to the extractor unit, and will invalidate the manufacturer’s warranty.

Cleaning Unit

To clean, use a light wipe with a gentle cleaner to prevent build up of particulate and flux

residue. Be sure the unit is turned off while cleaning.

The cooling inlets and outlets should be cleaned once a year to prevent build up of dust and

overheating of which are on each side of the unit.

Replacing Filters

1. Turn unit off and disconnect the power cord.

2. Unlatch both filter cover catches and remove the filter cover. (see below)

Place Filter inside

the Alignment Pins

Step 2:

Unhook

Latch

Step 1:

Pull & Lift

Latch

Filter

On/Off

Switch

Latch