3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

ALWAYS read the instructions before setting up the equipment and before use.

Failure to heed these warnings may result in damage to the equipment or serious

personal injury.

WORKPLACE SAFETY

1. ALWAYS inspect the crane before use to ensure it is correctly assembled and in

good condition and replace any damaged or worn parts.

2. Only use the crane on a flat, solid, level surface that is capable of bearing the

weight of the loaded crane, preferably concrete. NEVER work on soft/unmade

ground as the castors may sink in.

3. Ensure the crane operator is trained in both operation & safety aspects of its use.

4. DO NOT allow personnel to use the crane unless they have read these safety

precautions.

5. Use the crane in a suitable, well lit work area which is clean, tidy and free from

unrelated items.

6. DO NOT use the crane when you are tired or under the influence of alcohol,

drugs or intoxicating medication.

7. Ensure all bystanders keep at a safe distance whilst the crane is in use.

8. DO NOT over-reach. Keep your proper footing and balance at all times.

9. Safety equipment such as gloves and non-skid safety shoes will reduce personal

injuries.

INSPECTION BEFORE USE

1. ALWAYS visually inspect the crane before use, to ensure that all parts are

correctly located and secure. Check for cracks, deformation or other signs of

damage or worn parts and check the castors for damage. DO NOT use the crane

unless it is totally sound.

2. Check castors to ensure they move freely without undue wear to their pivots, and

that the wheels are not cracked or damaged.

SAFE OPERATING PRACTICE

1. Only use chains, slings, hooks etc. with a rated capacity equal to, or greater than

that of the load. Check that they are secure and will not slip under load.

2. NEVER exceed the safe working load capacities specified on the jib for each

position (as marked on the jib).

3. ALWAYS fully lock the jib and legs into position before lifting.