5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ADDITIONAL SAFETY INSTRUCTIONS FOR

CHAINSAW SHARPENERS

1. WARNING: Sharp edges on blade/chain.

2. Remember that the wheel continues to rotate after the tool is switched off.

3. ALWAYS wear safety eye protection when using the sharpener.

4. The sharpener is designed for sharpening the majority of common chainsaw

chains. DO NOT use it for any other purpose.

5. DO NOT sharpen damaged chainsaw chains.

6. ALWAYS make sure the sharpener is firmly fixed to a workbench before use.

7. DO NOT operate the sharpener without the protective cover in place and make

sure that all parts are firmly assembled before starting the sharpener.

8. DO NOT operate the sharpener if it does not work correctly or has been

damaged.

SPECIFICATIONS

Operating Voltage:

230 V @ 50 Hz

Nominal Power

85 Watts

Protection Class

II

IP Rating

IP20

Motor Speed

5800 rpm

Grinding Wheel Speed Rating

40 m/s, 7074 rpm

Disc Dimensions

108 mm (Diameter) x 3.2 mm (Thick)

Arbor/Bore Diameter

23 mm

Sharpening Angle

35° Right to Left

Dimensions (W x D x H)

180 x 230 x 320 mm

Weight (kg)

2 kg