5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Ensure the tabs lie flat against the

surface of the post.

3. Join the two end assemblies

together with the long beams (C).

4. Connect the support beams (E) to

the long beams (C). First bend the

flexible tabs to 90 degrees to pass

them through the slotsin the long

beams.

•

The tab initially pays flat against

the long beam (C).

5. Next, bend the tab back through

180 degrees to grip the long

beam.

•

Use a screwdriver or similar tool to

bend the tabs.

6. Finally bend the tab again through

90 degrees the opposite way, to

seat tightly against the support

beam (E).

7. . Ensure there is no movement

between the beams.