3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

This headshield is not suitable for laser welding, laser cutting or overhead

welding applications or for oxy-acetylene.

•

The protective plate in this headshield is breakable and will not protect

against impact hazards.

•

This headshield is designed for use in grinding, arc welding or cutting

applications such as MIG/MAG, TIG, MMA, Plasma Arc, and Carbon Arc.

•

Use this headshield for face and eye protection against harmful rays,

sparks and spatter from welding and cutting.

•

Never place this product on a hot surface.

•

In the event of failure, the headshield remains protection against UV and IR

radiation.

•

Do not make any modifications to this product. Protection can be seriously

impaired if modifications are made.

•

When necessary, use identical replacement parts. This will ensure that the

safety of the product is maintained.

•

Do not use without the protective plate installed. Do not use if any part of

the headshield is cracked or broken.

•

Do not use this headshield for welding outside the range of DIN 9-13. Harm

to the eyes and impaired eyesight may result. Always select the correct

setting before use.

PREPARATION & USE

ADJUSTING THE HEADBAND TO FIT

1. The headband should be adjusted both in diameter and height to fit the

wearer’s head. To do this, press the adjustment knob on the back of the

headband and turn the nut either left or right to expand or contract the

headband.

2. The top headband can be adjusted by bending the strap and positioning

the peg in the appropriate hole.

3. When the headband adjusting nuts are tight, the angle of tilt can be

quickly and repeatably adjusted using the adjusting tab, by placing it on

the chosen peg on the headband.