3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY WARNINGS

• The protective lens in this headshield is breakable and should only

be used for welding applications.

• This headshield is designed for use in arc welding or cutting

applications such as ARC, MIG/MAG.

• Use this headshield for face and eye protection against harmful rays,

sparks and spatter from welding and cutting.

• This headshield is not suitable for oxyacetylene, laser welding, laser

cutting or “overhead” welding applications.

• Never place this product on a hot surface.

• Do not make any modifications to this product. Protection can be

seriously impaired if modifications are made.

• When necessary, use identical replacement parts. This will ensure

that the safety of the product is maintained.

• Only trained welders should use this product.

• Do not use without protective lens cover installed. Do not use if any

part of the headshield is cracked or broken.

• Do not use this headshield for welding above the range of DIN 11.

Harm to the eyes and impaired eyesight may result.

• Always use the mask for the duration of exposure to hazards. Stop

work if dizziness or eye irritation occurs or if the mask becomes

damaged.

• Please keep these instructions in a safe place for future reference.