2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Welding Torch.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

GENERAL SAFETY PRECAUTIONS

WARNING: IN ADDITION TO THE FOLLOWING PRECAUTIONS, YOU SHOULD READ,

AND FULLY COMPLY WITH, ALL INSTRUCTIONS AND SAFETY PRECAUTIONS THAT

WERE SUPPLIED WITH YOUR TIG WELDER. PLEASE KEEP THESE INSTRUCTIONS IN A

SAFE PLACE FOR FUTURE REFERENCE.

1. NEVER point the torch at any person or animal.

2. NEVER touch the nozzle unless the welder is switched OFF and the nozzle

has been allowed to cool off.

3. NEVER connect, disconnect, or attempt to service the torch, unless the

welder is switched OFF and disconnected from the mains power supply.

4. NEVER allow the cables to become wrapped around the operator or

anyone in the vicinity.

5. When welding, users and bystanders must ALWAYS use a protective

headshield fitted with the correct shade of lens. Failure to do so can cause

serious damage to your eyes.