13

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLING THE WELDING SHIELD

1. The welding shield shown is

supplied flat for shipping. Fold the

sides of the shield around and clip

to the top panel.

2. Insert both the glass lens panels

into the recess inside the shield.

•

The clear glass must be fitted first

to face the outside.

3. Insert the two plastic screws and

use the plastic wingnuts to clamp

the glass panels to the shield.

•

The clear glass panel should be

replaced when it becomes badly

pitted.

4. When replacing the glass panels, only use parts supplied by Clarke

International. The dark panel is a certified, optical glass and should not be

exchanged for any other type.

5. Secure the handle in

position using the plastic

nuts provided.

•

The handle will be

mounted on the inside of the

shield.