2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE MIG Welder.

Before attempting to operate the machine it is essential that you read this

manual thoroughly and carefully follow all instructions given. In doing so you

will ensure the safety of yourself and that of others around you, and you can

also look forward to the welder giving you long and satisfactory service.

When unpacking, any damage or deficiency should be reported to your

CLARKE dealer immediately. Some of the components are stored within the

machine side compartment.

MIG WELDING PRINCIPLES

MIG (Metal Inert Gas) welding allows you to fuse together two similar metals

without altering the properties of the metal.

A consumable wire electrode is continuously fed through the welding torch

that is fitted with a concentric gas nozzle. the wire is connected to a high

voltage supply which creates an electric arc between the electrode (the

wire) and the workpiece. The arc is used to create the required heat to turn

the metal into a molten state. The wire is used as both the electrode and as a

filler.

When using a gasless welder the shielding gas is created from the flux within

the welding wire.

When using the welder outside, you may need to erect a wind break.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.