21

©2018 Integrated Device Technology, Inc.

March 13, 2018

8SLVP2102 Datasheet

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without

notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed

in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any

particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intel-

lectual property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably

expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of

IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.

Tech Support

www.IDT.com/go/support

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138 USA

www.IDT.com

Revision History

Date

Description of Change

March 13, 2018

Updated the package outline drawings; however, no technical changes

Completed other minor changes

August 21, 2017

Added a feature about case temperature to Features

Added Case Temperature Considerations

Updated the Package Outline Drawings. No mechanical changes.

February 26, 2014

Ordering Info: Changed Tray to Tube.

January 28, 2014

Changed Note 6 to read “VIL should not be less than -0.3V. VIH should not be higher than VCC.”

January 30, 2013

Added Features Bullet: Differential PCLKA, nPCLKA and PCLKB, nPCLKB pairs can also accept single-ended

LVCMOS levels.

Added NOTE 8 to VPP, VCMR.

Updated the “Wiring the Differential Input to Accept Single-Ended Levels” note.

July 31, 2012

Ordering Information Table - added additional row.

Added Orientation Packaging Table.

June 20, 2012

Power Supply DC Characteristics Tables - changed ICC to 180mA. Added “±1” to test conditions (PCN #651).