32196 datasheet(32/1044 Pages) RENESAS

32 / 1044 page

1-12

32192/32195/32196 Group Hardware Manual

OVERVIEW

Rev.1.10 REJ09B0123-0110 Apr.06.07

Table 1.3.1 Description of Pin Functions (1/3)

Type

Pin Name

Signal Name

Input/Output Description

Power supply

VCCER

Internal power

–

Power supply input for the internal voltage generator circuit

supply input

(5.0 V ± 0.5 V or 3.3 V ± 0.3 V).

VCCE

Port/internal

–

Power supply input for the port and internal peripheral I/O

peripheral I/O pin

pins (5.0 V ± 0.5 V or 3.3 V ± 0.3 V).

power supply input

Apply same voltage to the all VCCE pins.

VCC-BUS

Port/bus interface

–

Power supply input for the port and bus interface pins

pin power supply

(5.0 V ± 0.5 V or 3.3 V ± 0.3 V).

input

Apply same voltage to the all VCC-BUS pins.

VDDE

RAM power supply

–

Backup power supply input for the internal RAM (5.0 V ± 0.5 V

input

or 3.3 V ± 0.3 V).

VSS

Ground

–

Connect all VSS pins to ground (GND).

THERMAL-

THERMAL BALL

–

Connect THERMAL BALL to the ground (GND).

BALL(Note 2)

EXCVCC

VCCER control

–

This pin connects an external capacitor for the internal

voltage generator circuit.

EXCVDD

VDDE control

–

This pin connects an external capacitor for the internal

power supply of the internal RAM.

Clock

XIN,

Clock input

Input

These are clock input/output pins. Including a PLL-based ×8

XOUT

Clock output

Output

frequency multiplier, they input 1/8 of the CPU clock frequency.

(XIN input is 20 MHz when f(CPUCLK) = 160 MHz.)

CLKOUT,

System clock

Output

The CLKOUT pin outputs a clock that is equal to the external

BCLK

input clock frequency, XIN (i.e., CLKOUT output is 20 MHz

when f(CPUCLK) = 160 MHz), or two times of XIN (i.e.,

CLKOUT output is 40 MHz when f(CPUCLK) = 160 MHz).

(It is used when operationg synchronous setting in external)

This clock is used when operations are synchronous

external to the chip.The BCLK pin outputs a clock that is two

times the external input clock frequency, XIN (i.e., BCLK

output is 40 MHz when f(CPUCLK) = 160 MHz).

Reset

RESET#

Reset

Input

Reset input pin for the internal circuit.

Mode

MOD0

−

Mode

Input

Set the microcomputer’s operation mode.

MOD2

MOD0

MOD1

MOD2

Mode

Single-chip mode

External extension mode

Processor mode (boot mode)

(Note 1)

(Settings inhibited)

X: Don’t care

Flash protect

Input

This special pin protects the flash memory against rewrites

in hardware.

Address bus

A9–A30

Address bus

Output

Twenty-two address lines (A9–A30) are included, allowing

four blocks each up to 8 Mbyte memory space to be

connected external to the chip. A31 is not output.

Note 1: Boot mode requires that the FP pin should be at the “H” level. For details about boot mode, see Chapter 6, “Internal

Memory.”

Note 2: THERMAL BALL has a pin only in the M32192F8xWG.

1.3 Pin Functions

32196 Datasheet(PDF) 32 Page - Renesas Technology Corp

32196 Datasheet(HTML) 32 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL