© 2005 System Sensor. The company reserves the right to change product specifications without notice.

A05-0205-005•3/05•#1427

Ordering Information

Part No.

Description

1451

Ionization detector. Must be mounted to one of the B40X series bases listed in Mounting Base Guide.

1451A

Same as above, Canadian model

5451

Fixed heat detector with rate-of-rise. Alarm point at 57.2°C (135°F). Must be mounted to one of the 400

Series Bases listed in Mounting Base Guide.

Accessories

Description

RA400Z

Remote annunciator for 2- or 4-wire systems, 3–32V. Use with ion and photo plug-in detectors.

Fits standard U.S. single gang electrical box.

B401BH

Sounder base with B401. Requires an external 24 VDC power supply.

MOD400R

Detector sensitivity test tool. (See below.) Use with most analog or digital multimeters.

Satisfies requirement of NFPA 72 for sensitivity testing. (See below.)

RMK400

Recessed mounting kit for use with B401 or B401R mounting bases only. (See below.)

SMK400

Surface mounting kit provides for entry of surface wiring conduit.

For use with B401 or B401R mounting bases only.

EOLR-1

End of line relay for power supervision, 12/24 VDC, 4-wire only.

RS14

Replacement insect screen for 1451.

DUST45

Replacement protective dust cover for plug-in 400 Series.

CRT400

Cover removal tool for 1451.

M02-04-01

Test magnet.

M02-09-00

Test magnet with 32 inch telescoping handle.

XR5

Detector removal tool. Allows installation and/or removal of ion, photo,

and thermal detector heads from base in high ceiling installations.

XP-4

Extension pole for XR5. Comes in three 5 ft. sections.

The MOD400R Field Sensitivity Test Module can be used with

any standard DC voltmeter or multimeter to check the sensitivity

range of System Sensor’s detectors (satisfies NFPA 72 require-

ment for sensitivity testing).

System Sensor’s Recessed Mounting Kit, RMK400, provides

a simple installation solution where applications demand a

lower profile smoke detector and reduces the depth of any

400 Series plug-in detector by almost an inch. A special

metal mounting bracket secures the kit and the base to

the junction box and ceiling panel. (For use with B401 and

B401R bases only.)

System Sensor Sales and Service

System Sensor Headquarters

3825 Ohio Avenue

St. Charles, IL 60174

Ph: 800/SENSOR2

Fx: 630/377-6495

www.systemsensor.com

System Sensor Canada

Ph: 905.812.0767

Fx: 905.812.0771

System Sensor Europe

Ph: 44.1403.891920

Fx: 44.1403.891921

System Sensor in China

Ph: 86.29.8832.0119

Fx: 86.29.8832.5119

System Sensor in Singapore

Ph: 65.6273.2230

Fx: 65.6273.2610

System Sensor – Far East

Ph: 85.22.191.9003

Fx: 85.22.736.6580

System Sensor – Australia

Ph: 613.54.281.142

Fx: 613.54.281.172

System Sensor – India

Ph: 91.124.237.1770 x.2700

Fx: 91.124.237.3118

System Sensor – Russia

Ph: 70.95.937.7982

Fx: 70.95.937.7983