LIS302DLH datasheet(30/37 Pages) STMICROELECTRONICS

30 / 37 page

LIS302DLH

30/37

Doc ID 15797 Rev 1

7.10

OUT_X_L (28h), OUT_X_H (29h)

X-axis acceleration data. The value is expressed as two’s complement.

7.11

OUT_Y_L (2Ah), OUT_Y_H (2Bh)

Y-axis acceleration data. The value is expressed as two’s complement.

7.12

OUT_Z_L (2Ch), OUT_Z_H (2Dh)

Z-axis acceleration data. The value is expressed as two’s complement.

7.13

INT1_CFG (30h)

ZYXDA

X, Y and Z axis new data available. Default value: 0

(0: a new set of data is not yet available; 1: a new set of data is available)

ZDA

Z axis new data available. Default value: 0

(0: a new data for the Z-axis is not yet available;

1: a new data for the Z-axis is available)

YDA

Y axis new data available. Default value: 0

(0: a new data for the Y-axis is not yet available;

1: a new data for the Y-axis is available)

XDA

X axis new data available. Default value: 0

(0: a new data for the X-axis is not yet available;

1: a new data for the X-axis is available)

Table 36.

STATUS_REG description (continued)

Table 37.

INT1_CFG register

AOI

ZHIE

ZLIE

YHIE

YLIE

XHIE

XLIE

Table 38.

INT1_CFG description

AOI

AND/OR combination of Interrupt events. Default value: 0.

(See

Table 39)

6 direction detection function enable. Default value: 0.

(See

Table 39)

ZHIE

Enable interrupt generation on Z high event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value higher than preset threshold)

ZLIE

Enable interrupt generation on Z low event. Default value: 0

(0: disable interrupt request;

1: enable interrupt request on measured accel. value lower than preset threshold)

LIS302DLH Datasheet(PDF) 30 Page - STMicroelectronics

LIS302DLH Datasheet(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Datasheet Download

Link URL