• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1

Wide Band GaAs MMIC Amplifier

0.2 - 3.0 GHz

Rev. V4

MAAM02350

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• High Gain: 19 dB Typical

• Output Power: +14 dBm Typical

• Noise Figure: 3.7 dB Typical

• RoHS* Compliant

Description

M/A-COM’s MAAM02350 is a wide band, MMIC

amplifier. It includes two integrated gain stages and

employs resistive feedback to obtain flat gain and a

good,

50

ohm

input,

a nd

output

impedance match over a very wide bandwidth. The

MAAM02350 operates from a single +6 V supply. It

is fully monolithic.

The MAAM02350 functions well as a generic IF,

driver or buffer amplifier where high gain, low noise

figure, excellent linearity and low power consumption

are important. Because of its wide bandwidth, the

MAAM02350

can

be

used

in

numerous

commercial and government system applications,

such as wireless communications, EW and radar.

The

MAAM02350

is

manufactured

in-house

using

a

reliable,

0.5-micron,

GaAs

MESFET

process. This product is 100% RF tested to ensure

compliance to performance specifications.

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Pad Layout

Absolute Maximum Ratings

1,2

1. Exceeding any one or combination of these limits may cause

permanent damage to this device.

2. M/A-COM does not recommend sustained operation near

these survivability limits.

3. Typical thermal resistance (

θjc) = +80°C/W.

Parameter

Absolute Maximum

+7 V

Input Power

+20 dBm

Channel Temperature

3

+150°C

Operating Temperature

-55°C to +100°C

Storage Temperature

-65°C to +150°C

Ordering Information

4,5

Part Number

Package

MAAM02350

DIE

4. Reference Application Note M538 for lead-free solder reflow

recommendations.

5. Die quantity varies.

Die Size—Inches (mm)

0.044 x 0.032 x 0.004 (1.140 x 0.820 x 0.102)

Outline Drawing