ATmega3290P datasheet(132/385 Pages) ATMEL

132 / 385 page

132

8021E–AVR–07/09

ATmega329P/3290P

Table 15-3 shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the fast

PWM mode.

Note:

1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is set. In

this case the compare match is ignored, but the set or clear is done at BOTTOM. See Section

“15.9.3” on page 123. for more details.

Table 15-4 shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the phase

correct or the phase and frequency correct, PWM mode.

Note:

1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is set. See

Section “15.9.4” on page 125. for more details.

• Bit 1:0 – WGM11:0: Waveform Generation Mode

Combined with the WGM13:2 bits found in the TCCR1B Register, these bits control the counting

sequence of the counter, the source for maximum (TOP) counter value, and what type of wave-

form generation to be used, see Table 15-5 on page 133. Modes of operation supported by the

Timer/Counter unit are: Normal mode (counter), Clear Timer on Compare match (CTC) mode,

and three types of Pulse Width Modulation (PWM) modes. (See Section “15.9” on page 122.).

Table 15-3.

Compare Output Mode, Fast PWM(1)

COM1A1/COM1B1

COM1A0/COM1B0

Description

Normal port operation, OC1A/OC1B disconnected.

WGM13:0 = 14 or 15: Toggle OC1A on Compare

Match, OC1B disconnected (normal port operation).

For all other WGM1 settings, normal port operation,

OC1A/OC1B disconnected.

Clear OC1A/OC1B on Compare Match, set

OC1A/OC1B at BOTTOM (non-inverting mode)

Set OC1A/OC1B on Compare Match, clear

OC1A/OC1B at BOTTOM (inverting mode)

Table 15-4.

Compare Output Mode, Phase Correct and Phase and Frequency Correct

PWM

(1)

COM1A1/COM1B1

COM1A0/COM1B0

Description

Normal port operation, OC1A/OC1B disconnected.

WGM13:0 = 9 or 11: Toggle OC1A on Compare

Match, OC1B disconnected (normal port operation).

For all other WGM1 settings, normal port operation,

OC1A/OC1B disconnected.

Clear OC1A/OC1B on Compare Match when up-

counting. Set OC1A/OC1B on Compare Match when

counting down.

Set OC1A/OC1B on Compare Match when up-

counting. Clear OC1A/OC1B on Compare Match

when counting down.

ATmega3290P Datasheet(PDF) 132 Page - ATMEL Corporation

ATmega3290P Datasheet(HTML) 132 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL