6

General Purpose Relay

MK

Unit: mm (inch)

Mounting tracks

Note: 1. *This dimension applies to mounting track PFP-50N.

2. A total of twelve 25 x 4.50 mm (0.98 x 0.18 in) elliptic holes is provided with six holes cut from each rail end at a pitch of

10 mm (0.39 in) holes.

PFP-M end plate

Note: Use of Type PFP-M end plate is recommended to secure the socket on the mounting track. Be sure that the engraved arrow

mark on the surface of the end plate faces upward and then tighten the screw firmly with a screwdriver.

PL11-Q

Wire wrap terminals

Printed circuit

board socket

PLE11-0

Back connecting socket

MK3 sockets (11 pin)

PL11 (UL File No. E87929)

Solder terminals

PL11 type sockets and MK3 relay

Total height dimension

Recommended PCB layout

PLE11-0

Mounting holes

PL11

PFP-100N/PFP-50N

(conforming to DIN EN 500022

PFP-100N2

(conforming to DIN EN 500022)