Standard Unshrouded Header Plug

XG8

75

Accessories

■ Top Lock Levers

XG5Z-0002 - “Lock Lever”

Can be used to lock XG8W Double-row Right-angle Terminal Plugs

to XG4M Flat Cables and XG5M-N Discrete-wire IDC Connectors.

(See XG4 and XG5 Datasheets).

They cannot be used with XG8W Double-row Straight Terminal Plugs.

Note: Order the above model in multiples of 10 pieces.

Mounting the Lock Lever

Insert the tab on the Lock Lever into the hole on a Socket with a

polarity guide. In this way, it can be locked with XG8W Right-angle

Terminal Plugs.

Precautions

■ Correct Use

Dividing the XG8W (with Straight Terminals), XG8V,

XG8A, and XG8B

The above mentioned models may have the number of terminals and

rows reduced prior to pcb assembly, using the following method:

• Using a Cutter, make a cut on the slot as indicated by the dotted

line in the diagram. Then fold the Plug manually in the direction of

the arrows.

• XG8W’s with right-angle terminals are not designed to be divided in

this manner. Do not divide the XG8W with right-angle terminals.

Instead, use the XG8B Header Plug Strip with right-angle termi-

nals, if a double-row header plug with right-angle terminals must be

divided to reduce the number of terminal rows.

Automated Soldering Conditions (Jet Flow)

1. Soldering temperature: 250

±5°C

2. Continuous soldering time: Within 5 s

XG8

Polarizing guide hole XG4M

Tab

Lock lever

(1) Using a cutter,

make a cut along

the dotted line.

(2) Manually fold in

the direction of the

arrows.