AD9963-EBZ datasheet(29/60 Pages) AD

29 / 60 page

AD9961/AD9963

Rev. 0 | Page 29 of 60

Address

Bit(s)

Parameter

Function

010: 2.0 V.

011: 2.5 V.

100: 3.0 V.

1:0

DAC10B_RNG[1:0]

The total range of the DAC extends from top-of-range, to top-of-range

minus the span. The span is set as:

00: 2.0 V.

01: 1.5 V.

10: 1.0 V.

11: 0.5 V.

DAC10BMSBs

0x46

7:0

DAC10B[9:2]

DAC10B voltage control word (eight most significant bits).

DAC10BLSBs

0x47

7:2

Unused

1:0

DAC10B[1:0]

DAC10Bvoltage control word (two least significant bits).

DAC10A Config

0x48

DAC10A_EN

0: powers down DAC10A.

1: enables DAC10A.

6:5

Unused

4:2

DAC10A_TOP[2:0]

Sets the DAC output voltage at the top range as follows:

000: 1.0 V.

001: 1.5 V.

010: 2.0 V.

011: 2.5 V.

100: 3.0 V.

1:0

DAC10A_RNG[1:0]

The total range of the DAC extends from top-of-range to top-of-range

minus the span. The span is set as:

00: 2.0 V.

01: 1.5 V.

10: 1.0 V.

11: 0.5 V.

DAC10A MSBs

0x49

7:0

DAC10A[9:2]

DAC10A voltage control word (eight most significant bits).

DAC10A LSBs

0x4A

7:2

Unused

1:0

DAC10A[1:0]

DAC10A voltage control word (two least significant bits).

TX BIST Control

0x50

7:5

Unused

TX_PTTRN

Chooses the pattern type for the BIST sequence.

0: selects checker board pattern (0xA5A, 0x5A5, 0xA5A, …).

1: selects PRN output.

TX_INSEL

0: selects pattern input from internal pattern generator.

1: selects pattern from the external pins of the Tx port.

TX_CONT

0: runs the BIST for 512 cycles.

1: runs the BIST continuously.

TX_START

0: keep the BIST engine in an idle state.

1: start the BIST sequence.

TX_BISTEN

0: disable the BIST engine.

1: enable the BIST engine.

RX BIST Control

0x51

7:5

Unused

RX_PTTRN

Chooses the pattern type for the BIST sequence.

0: selects checker board pattern (0xA5A, 0x5A5, 0xA5A, …).

1: selects PRN output.

RX_INSEL

0: selects pattern input from internal pattern generator.

1: selects pattern from the external pins of the Rx path.

RX_CONT

0: runs the BIST for 512 cycles.

1: runs the BIST continuously.

AD9963-EBZ Datasheet(PDF) 29 Page - Analog Devices

AD9963-EBZ Datasheet(HTML) 29 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL