V2-EVAL datasheet(4/64 Pages) FTDI

4 / 64 page

Document Reference No.: FT_000247

V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0

Clearance No.: FTDI#148

1 Introduction

The following document details the features and specifications of the V2-EVAL board. The V2-EVAL is a

hardware platform designed to support easy evaluation of FTDI‟s Vinculum-II (VNC2) series of

embedded USB host controller devices.

The V2-Eval kit includes the following hardware items as standard



1 x V2-Eval base board.



1 x 5V/1A mains adapter PSU – UK, US, European and Japanese versions available.



1 x USB A/B cable to connect to a host PC in programming / terminal emulation or debugging

modes.



1 x USB gender changer for USB slave mode applications.

NOTE:

The V2-EVAL kit requires a VNC2 based daughterboard module to be installed into the V2-EVAL

base board socket site, in order to enable development with the kit.

Daughterboard modules are sold separately, with 3 versions available for 32-pin, 48-pin and 64-pin

package devices.

Daughterboard modules can be purchased from FTDI or via our website

http://www.ftdichip.com.

Before you proceed:

Please check that all the contents of the package are not damaged.

Ensure that your kit includes a proper version of the power supply, depending on the region where you

live. Eval application software and project examples can be downloaded from: http://www.ftdichip.com

1.1

Handling the board

Static discharge precaution – Without proper anti-static handling the board can be damaged.

Therefore, take anti-static precautions while handling the board.

1.2

Environmental requirements

The V2-Eval Board must be stored between -40°C and 80°C. The recommended operating temperature is

between 0°C and 55°C

Figure 1.1 - V2-EVAL Motherboard(left) with Daughterboard Module(right)

V2-EVAL Datasheet(PDF) 4 Page - Future Technology Devices International Ltd.