Micrel, Inc.

MIC2095/97/98/99

September 2010

21

M9999-092010-C

Evaluation Board Schematic

Figure 10. Schematic of MIC209X Evaluation Board

Notes:

1. Evaluation board is used for all parts.

2. Part numbering scheme is 209X-Y where X is the place holder for the last number (i.e. MIC2095, MIC2097, MIC2098 or MIC2099) and Y is the

polarity of the enable signal (-1 indicates active high logic and -2 indicates active low logic).

4. MIC209X-2 EN/ pin only requires R3 (pull-down resistor-to-GND) to enable the output without an external enable signal.

5. R1 is NF (no fill) with the MIC2095 (fixed current limit).