SAM3U datasheet(47/59 Pages) ATMEL

47 / 59 page

6430ES–ATARM–22-Aug-11

SAM3U Series

12. Embedded Peripherals Overview

12.1

Serial Peripheral Interface (SPI)

• Supports communication with serial external devices

– Four chip selects with external decoder support allow communication with up to 15

peripherals

– Serial memories, such as DataFlash and 3-wire EEPROMs

– Serial peripherals, such as ADCs, DACs, LCD Controllers, CAN Controllers and

Sensors

– External co-processors

• Master or slave serial peripheral bus interface

– 8- to 16-bit programmable data length per chip select

– Programmable phase and polarity per chip select

– Programmable transfer delays between consecutive transfers and between clock

and data per chip select

– Programmable delay between consecutive transfers

– Selectable mode fault detection

• Very fast transfers supported

– Transfers with baud rates up to MCK

– The chip select line may be left active to speed up transfers on the same device

12.2

Two Wire Interface (TWI)

• Master, Multi-Master and Slave Mode Operation

• Compatibility with Atmel two-wire interface, serial memory and I

2C compatible devices

• One, two or three bytes for slave address

• Sequential read/write operations

• Bit Rate: Up to 400 kbit/s

• General Call Supported in Slave Mode

• Connecting to PDC channel capabilities optimizes data transfers in Master Mode only

– One channel for the receiver, one channel for the transmitter

– Next buffer support

12.3

Universal Asynchronous Receiver Transceiver (UART)

•Two-pin UART

– Implemented features are 100% compatible with the standard Atmel USART

– Independent receiver and transmitter with a common programmable Baud Rate

Generator

– Even, Odd, Mark or Space Parity Generation

– Parity, Framing and Overrun Error Detection

– Automatic Echo, Local Loopback and Remote Loopback Channel Modes

– Support for two PDC channels with connection to receiver and transmitter

SAM3U Datasheet(PDF) 47 Page - ATMEL Corporation

SAM3U Datasheet(HTML) 47 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Datasheet Download

Link URL