MPLAB®Starter Kit for PIC24F MCUs (DM240011)

This kit includes an integrated in-circuit

debugger and programmer, USB device

and host connectors, tri color LED,

capacitive touch pad and an OLED

display. Menu driven demonstration software supports

data logging, thumb drive and graphics applications to test

the PIC24F MCU.

Explorer 16 Starter Kit (DV164037)

This kit is a complete set of tools for

application development supporting

Microchip’s PIC24F, PIC24H and dsPIC33

16-bit and PIC32 32-bit microcontrollers.

This kit includes a MPLAB ICD 3 In-Circuit Debugger, an

Explorer 16 Development Board, a 9V universal power

supply for use with either the Explorer 16 board or the

MPLAB ICD, a serial cable and both a PIC24FJ128GA010

and a dsPIC33F256GP710 device (mounted on plug-in

modules for quick replacement).

MPLAB®Starter Kit for dsPIC DSCs (DM330011)

This starter kit introduces users to the

dsPIC Digital Signal Controller device

using its speech and audio processing

capabilities. The kit is USB-powered, has

on-board debug circuitry and 24-bit codec for high-quality

audio applications. Also on the board are reconfigurable

switches, potentiometers, a temperature sensor and a 4

Mb serial EEPROM to store data such as audio samples.

PIC32 Starter Kit (DM320001)

With over 35 source code examples

to the getting started project, this kit

includes everything needed to write,

program, debug and execute code on a

high performance PIC32 microcontroller.

PIC32 USB Starter Kit II (DM320003-2)

This kit provides the easiest and lowest cost

method to experience the USB and CAN

functionality of the PIC32 microcontrollers.

Users can develop CAN applications using

PIC32 expansion boards. The board contains

everything need to develop USB embedded host/device/

OTG applications by combining this board with Microchip's

free USB software.

PIC32 Ethernet Starter Kit (DM320004)

The PIC32 Ethernet Starter Kit provides

the easiest and lowest cost method to

experience 10/100 Ethernet development

with PIC32. Combined with Microchip's

free TCP/IP software, your project will be

running in no time. The PIC32 has an available CAN2.0b

peripheral and USB host/device/OTG.

Getting Started

Starter Kits

Starter Kits are complete, affordable, turnkey solutions

consisting of hardware and software sufficient for exploring

specific applications or the features of the device family

they represent. Most kits include an on-board or separate

debugger, a CD containing MPLAB IDE and Lite compiler

editions and tutorials. To get started, simply install the

software, start MPLAB IDE, connect the hardware and step

through the easy-to-follow tutorials.

F1 Evaluation Kit (DV164132)

The F1 Evaluation Kit is a

demonstration/development tool for

Enhanced Mid-Range PIC microcontrollers

(PIC12F1XXX/PIC16F1XXX) and includes

the PICkit 3 for quick programming and development.

Populated with a PIC16LF1937 featuring XLP technology,

this platform consists of a 44-pin development board with

prototyping space, 3V LCD glass, support for the Motor

Control add-on and support for PICkit 3 and PICkit Serial

Analyzer. This kit provides a platform for general purpose

development, and includes demonstrations focusing on

low power, LCD and motor control.

MPLAB®Starter Kit for PIC18 MCU (DM180021)

This kit includes an on-board debugger/

programming capability as well as USB

communication, a capacitive touch pad,

potentiometer, acceleration sensor,

MicroSD™ memory card and an OLED display. The board

can function as a USB mouse, joystick or mass storage

device (thumb drive) all using the on-board capacitive

touch sense pads.

PIC18 Development Kit (DV164136)

This kit includes a PIC18 Explorer board,

PICkit 3 Debugger/Programmer, USB

cable and a 9V universal power supply.

The PIC18 Explorer board includes both

the PIC18F8722 and PIC18F87J11

microcontrollers and supports dozens of general purpose

PIC18 families using various processor Plug-in Modules

(PIMs). PICtail daughter boards enable many different

accessory boards to connect to the PIC18 Explorer.

MPLAB®Starter Kit for PIC24H MCUs (DM240021)

The PIC24H Starter Kit is a complete

hardware and software kit for exploring

the power of PIC24H family of MCUs

including a built-in debugger on the

board. A tri-axial accelerometer is provided for acceleration

detection. The starter kit also showcases a low cost audio

playback with an on-board speaker and an OLED display

running the Microchip Graphics library.