L6472 datasheet(56/69 Pages) STMICROELECTRONICS

56 / 69 page

Programming manual

L6472

56/69

Doc ID 022729 Rev 1

9.2.3

SetParam (PARAM, VALUE)

The SetParam command sets the PARAM register value equal to VALUE; PARAM is the

respective register address listed in Table 9.

The command should be followed by the new register VALUE (most significant byte first).

The number of bytes composing the VALUE argument depends on the length of the target

Some registers cannot be written (see Table 9); any attempt to write one of these registers

causes the command to be ignored and the WRONG_CMD flag to rise at the end of the

command byte as if an unknown command code was sent (see Section 9.1.18).

Some registers can only be written in particular conditions (see Table 9); any attempt to

write one of these registers when the conditions are not satisfied causes the command to be

ignored and the NOTPERF_CMD flag to rise at the end of last argument byte (see

Section 9.1.19).

Any attempt to set an inexistent register (wrong address value) causes the command to be

ignored and the WRONG_CMD flag to rise at the end of the command byte as if an

unknown command code was sent.

9.2.4

GetParam (PARAM)

This command reads the current PARAM register value; PARAM is the respective register

address listed in Table 9.

The command response is the current value of the register (most significant byte first). The

number of bytes composing the command response depends on the length of the target

The returned value is the register one at the moment of GetParam command decoding. If

the register value changes after this moment, the response is not accordingly updated.

All registers can be read anytime.

Table 35.

SetParam command structure

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

PARAM

From host

VALUE Byte 2 (if needed)

VALUE Byte 1 (if needed)

VALUE Byte 0

Table 36.

GetParam command structure

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

PARAM

From host

ANS Byte 2 (if needed)

To host

ANS Byte 1 (if needed)

To host

ANS Byte 0

To host

L6472 Datasheet(PDF) 56 Page - STMicroelectronics

L6472 Datasheet(HTML) 56 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

Datasheet Download

Link URL