DS41356B datasheet(5/54 Pages) MICROCHIP

5 / 54 page

LOW PIN COUNT USB

DEVELOPMENT KIT

USER’S GUIDE

DS41356B-page 1

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

Low Pin Count USB Development Kit. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the Low Pin Count USB Development Kit as a

development tool to emulate and debug firmware on a target board. The manual layout

is as follows:

• Chapter 1. “Overview”

• Chapter 2. “Getting Started Project Labs”

• Appendix A. “Schematics”

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB® IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.

DS41356B Datasheet(PDF) 5 Page - Microchip Technology