SMM0102 datasheet(2/5 Pages) VISHAY

2 / 5 page

Document Number: 20003

For technical questions, contact: melf@vishay.com

www.vishay.com

Revision: 16-Aug-11

SMM0102

Thin Film Micro-MELF Resistors

Vishay Draloric

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS

Notes

• Color code marking is applied according to IEC 60062 (1) in five bands. Each color band appears as a single solid line, voids are permissible

if at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the other

bands. An interrupted band between the 4th and 5th full band indicates the temperature coefficient (yellow = TC25, orange = TC15).

• Zero ohm jumper are marked with one centered black band.

PATTERN STYLES FOR MELF RESISTORS

Note

• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in

publication IPC-7351. They do not guarantee any supposed thermal properties, however, they will be found adequate for most general

applications.

DIMENSIONS AND MASS

TYPE

(mm)

L1 min.

(mm)

MASS

(mg)

SMM0102

OMM0102

2.2 + 0/- 0.15

1.1 + 0/- 0.1

1.2

D + 0/- 0.1

0.4 ± 0.05

RECOMMENDED SOLDER PAD DIMENSIONS

TYPE

WAVE SOLDERING

REFLOW SOLDERING

(mm)

SMM0102

OMM0102

0.7

1.2

1.5

3.1

1.1

0.8

1.3

2.7

SMM0102 Datasheet(PDF) 2 Page - Vishay Siliconix

SMM0102 Datasheet(HTML) 2 Page - Vishay Siliconix

Html Pages

1 2 3 4 5

Datasheet Download

Link URL