SACB12 datasheet(91/146 Pages) LITTELFUSE

91 / 146 page

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

Transient Voltage Suppression Diodes

Axial Leaded – 1500W > 1.5KE series

1.5KE Series

Speciﬁcations are subject to change without notice.

Please refer to www.littelfuse.com/series/1.5KE.html

for the most current information

AGENCY

AGENCY FILE NUMBER

E128662/E230531

1.5KE Series

RoHS

TVS devices are ideal for the protection of I/O interfaces,

CC bus and other vulnerable circuits used in telecom,

computer, industrial and consumer electronic applications.

Applications

Features

The 1.5KE Series is designed speciﬁcally to protect

sensitive electronic equipment from voltage transients

induced by lightning and other transient voltage events.

Description

Parameter

Symbol

Value

Unit

Peak Pulse Power Dissipation by

10x1000μs test waveform (Fig.1)

(Note 1)

PPM

1500

Steady State Power Dissipation on

iniﬁnite heat sink at T

L=75ºC (Fig. 5)

6.5

Peak Forward Surge Current, 8.3ms

Single Half Sine Wave Unidirectional

only (Note 2)

FSM

200

Maximum Instantaneous Forward

Voltage at 100A for Unidirectional

only (Note 3)

3.5/5.0

Operating Junction and Storage

Temperature Range

J, TSTG

-55 to 175

°C

Typical Thermal Resistance Junction

to Lead

uJL

°C/W

Typical Thermal Resistance Junction

to Ambient

uJA

°C/W

Notes:

1. Non-repetitive current pulse , per Fig. 3 and derated above T

A = 25

C per Fig. 2.

2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per

minute maximum.

3. V

F<3.5V for devices of VBR _

200V and V

F<5.0V for devices of VBR _

201V.

Maximum Ratings and Thermal Characteristics

A=25

C unless otherwise noted)

Agency Approvals

temperature coefﬁcient

Δ V

BR = 0.1% × VBR@25°C

junction in DO-201

Package

capability at 10×1000μs

waveform, repetition rate

(duty cycles):0.01%

typically less than 1.0ps

from 0 Volts to BV min

capability

resistance

R less than 1μA

above 13V

soldering guaranteed:

260°C/40 seconds /

0.375”,(9.5mm) lead

length, 5 lbs., (2.3kg)

tension

Underwriters Laboratory

Flammability classiﬁcation

94V-O

plated

SACB12 Datasheet(PDF) 91 Page - Littelfuse

SACB12 Datasheet(HTML) 91 Page - Littelfuse

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL