AD28msp01–SPECIFICATIONS

RECOMMENDED OPERATING CONDITIONS

K Grade

Symbol

Parameter

Min

Max

Unit

Supply Voltage

4.75

5.25

V

Ambient Operating Temperature

0

+70

°C

Refer to Environmental Conditions for information on case temperature and thermal specifications.

REV. A

–18–

ESD SENSITIVITY

The AD28msp01 features proprietary input protection circuitry to dissipate high-energy discharges

(Human Body Model). Per Method 3015 of MIL-STD-883 the AD28msp01 has been classified as a

Class 1 device.

Proper ESD precautions are strongly recommended to avoid functional damage or performance

degradation. Charges readily accumulate on the human body and test equipment and discharge without

detection. Unused devices must be stored in conductive foam, trays, or tubes, and the foam should be

discharged to the destination socket before devices are removed.

WARNING!

ESD SENSITIVE DEVICE

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

Operating Temperature Range (Ambient) . . . . . 0

°C to +70°C

Storage Temperature Range . . . . . . . . . . . . –55

°C to +150°C

Lead Temperature (5 seconds) SOIC . . . . . . . . . . . . +280

°C

*Stresses above those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. These are stress rating only and functional

operation of the device at these or any other conditions above those indicated in

the operational sections of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

Test Conditions Unless Otherwise Noted

Temperature

+25

°C

9.6 kHz

Input Signal Frequency

993.75 Hz

Input Signal Level

0.0 dBm0

Analog Input Gain

Unity

Analog Output Passband

220 Hz to 3.4 kHz